🌐 Languages

Synchronous cylinder

Synchronous cylinder > Synchronous cylinder

Hydraulic cylinder according to DIN, ISO

Technical Documents

ZTW 212 – ND 120 bar – data sheet
ztw-212.pdf PDF-document [1.77 MB]
Suitable mounting parts DIN 24337
befestigungsteile_din24337-10-1.pdf PDF-Dokument [775.3 KB]

ZTW 212 – Double-acting telescopic cylinder with displacement measuring system – Nominal pressure 120 bar (12 MPa)

Good to know: Here we have further developed the ZT 212 double-acting telescopic cylinder series in response to increased customer demand.

  • standardized
  • with a stroke length of up to 5000 mm, in 2- or 3- stage versions (available with more stages on request).
  • integrated displacement transducer, completely enclosed, sealed off (IP69K)
  • internally installed, pressure-resistant wire-actuated encoder for recording the displacement of the piston rod
  • reliable, absolute encoding of the stroke at every stage
  • for repeat accuracies of 0.2 mm.
  • for analog values, CANopen and redundant measurement
  • Plug connector as connection interface

Technical data

Nominal pressure: 120 bar (12 MPa)
Static test pressure: 180 bar (18 MPa)
Piston diameter: 63 – 140 mm (others possible on request)
Temperature range -20 °C … +80 °C (through hydraulic fluid)
Viscosity range: (10 … 600) 10-6 m²/s
Lifting speed: 0 – 0,5 m/s
Operating medium: Mineral oil according to DIN 51524, HFD fluids

Befestigungsarten

Technical Documents

ZT 212 – ND 120 bar – data sheet
zt212_teleskopzylinder_120bar.pdf PDF-document [3.5 MB]
Suitable mounting parts DIN 24337
befestigungsteile_din24337-10.pdf PDF-document [775.3 KB]

ZT 212 – Telescopic hydraulic cylinders (Storz standard) – Nominal pressure 120 bar (12 MPa)

Good to know: The telescopic cylinders are available in double-acting and single-acting versions.

  • standardized
  • in a 4-stage variant
  • Available in a choice of 6 mounting types for a wide range of applications

Technical data

Nominal pressure: 120 bar (12 MPa)
Static test pressure: 180 bar (18 MPa)
Piston diameter: 32 – 280 mm
Temperature range: -20…+80 °C
Viscosity range: 10…600 mm/s²
Lifting speed: 0-0,5 m/s
Operating medium: Mineral oil according to DIN 51524, HFD fluids HFA, HFB and HFC fluids by special designs

Befestigungsarten

Technical Documents

ZG 2511 – ND 250 bar – data sheet
zg2511_gleichgang_250bar.pdf PDF-Ddocument [354.2 KB]
Suitable mounting DIN 24337
befestigungsteile_din24337-8.pdf PDF-document [775.3 KB]

ZG 2511 – Standard hydraulic cylinders (DIN 24333) – Nominal pressure 250 bar with piston rod on both sides

Good to know: These hydraulic cylinders have a piston rod that emerges on either side. Their components essentially correspond to the standardized ZBD 2511 series.

  • Available in 3 mounting types, as well as several sealing variants and piston rod materials, for a wide range of applications
  • Developed as an addition to the STORZ ZBD 2511 hydraulic cylinder series, designed in accordance with the ISO 6022, DIN 24333 and VW 39D921 standards
  • Two piston rod diameters with the corresponding area ratios j=1.6 and j=2 are assigned to each piston diameter as standard

Technical data

Nominal pressure: 250 bar (25 MPa)
Static test pressure: 375 bar (37,5 MPa)
Piston diameter: 40-250 mm (larger than special version)
Area ratio j: 1,6 and 2
Temperature range: -20…+80 °C
Viscosity range: 10…600 mm²/s
Lifting speed: 0 – 1 m/s depending on seal variant
Operating medium: Mineral oil according to DIN 51524, HFD fluids HFA, HFB and HFC fluids possible through special designs

Befestigungsarten

Technical Documents

ZG 1605 – ND 160 bar – data sheet
zg1605_160bar.pdf PDF-document [1.1 MB]
ZG 1605 – ND 160 bar – Data sheet english
zg1605_160bar_en.pdf PDF-document [1.1 MB]
Suitable mounting DIN 24555/24556
befestigungsteile_din24555-1.pdf PDF-document [610.6 KB]

ZG 1605 – Standard hydraulic cylinders (ISO 6020/2) – Nominal pressure 160 bar with piston rod on both sides

Good to know: These hydraulic cylinders are designed according to the modular principle and have a piston rod emerging on both sides. The cylinder barrel, cylinder head and cylinder base are connected to one another by tie rods – the logical addition to the internationally standardized 160 bar tie rod cylinder series.
Their components essentially correspond to the standardized ZBD 1605 series.

  • Two piston rod diameters are assigned to each piston diameter
  • High degree of availability, stockable spare parts and future-proof design
  • Developed as an addition to the Storz ZBD 1605 series hydraulic cylinder, which was designed in accordance with ISO 6020/2 and DIN 24554.
  • 3 mounting types available as standard
  • Several sealing variants to choose from, for a wide range of applications

Technical data

Nominal pressure: 160 bar (16 MPa)
Static test pressure: 240 bar (24 MPa)
Piston diameter: 25-200 mm
Area ratio j: 1,25 and 2
Temperature range: -20…+80 °C
Viscosity range: 10…600 mm²/s
Lifting speed: 0 – 0,5 m/s depending on seal variant
Operating medium: Mineral oil according to DIN 51524, HFD fluids HFA, HFB and HFC fluids possible through special designs

Befestigungsarten

Technical Documents

ZG 1611 – ND 160 bar – data sheet
zg1611_gleichgang_160bar.pdf PDF-document [467.0 KB]
Suitable mounting DIN 24337
befestigungsteile_din24337-9.pdf PDF-document [775.3 KB]

ZG 1611 – Standard hydraulic cylinders (ISO 6020/1) – Nominal pressure 160 bar with piston rod on both sides

Good to know: These hydraulic cylinders have a piston rod that emerges on either side. Their components essentially correspond to those of the standardized ZBD 1611 series.

  • Standardized mounting types A, MT4, MF3, MF1 have been supplemented with a foot mounting
  • Available in several sealing variants and with a choice of different piston rod materials, for a wide range of applications
  • Developed in addition to the STORZ ZBD 1611 hydraulic cylinders, which were designed according to the ISO 6020/1 and VW 39D920 standards
  • Two piston rod diameters with the corresponding area ratios j=1.4 and j=2 are assigned to each piston diameter as standard

Technical data

Nominal pressure: 160 bar (16 MPa)
Static test pressure: 240 bar (24 MPa)
Piston diameter: 25-200 mm
Area ratio j: 1,4 and 2
Temperature range: -20…+80 °C
Viscosity range: 10…600 mm²/s
Lifting speed: 0 – 1 m/s depending on seal variant
Operating medium: Mineral oil according to DIN 51524, HFD fluids HFA, HFB and HFC fluids possible through special designs

Befestigungsarten

CONTACT PERSON

Every product starts with productive communication

To ensure that you find the right contact person right away: You can reach your destination quickly by selecting a department:

CONTACT US
Enquiry Cart
Enquiry Cart ×
Loading....